CB's for sale.

For all radio "maniacs" who doesn't speak/understand Finnish...
Avatar
OH2FFY
Viestit: 12
Liittynyt: 24.3.2010 19:21
Paikkakunta: Only Ham Op in Itäsalmi-Östersundom
Viesti:

CB's for sale.

Viesti Kirjoittaja OH2FFY »

Hi all.

I have a number of AM/SSB 40 channel CB's for sale.
They are USA specicification , so there is NO FM mode.
However they do do 12W SSB and 4-5W AM. 26.965 - 27.405MHz.

All are Uniden brand , which is similar to Cobra and their derivatives.

Overall I have about 20 rigs to sell , all are in perfect operating condition , but I will of course check them each over thoroughly before they sell just to be sure.

Cosmettically they range from being in a good looking condition to very good , some come with mounting brackets some do not.

They will be going up on Huuto.net and selling one by one , if any freinds through radiohullut.net wants one I will do an even better price.

Let me know if your interested. :-)

Thanks.

gregW:-) OH2FFY
QTH: Itä-Helsinki Elevated vertical and dipole both for 20 meters.
HAM: 100W , FT-840, FT-101ZD MK3 . Others - Codan, various QRP.
CB:Sidewinder III.(antiiki) AX-144.
Avatar
OH2FFY
Viestit: 12
Liittynyt: 24.3.2010 19:21
Paikkakunta: Only Ham Op in Itäsalmi-Östersundom
Viesti:

Re: CB's for sale.

Viesti Kirjoittaja OH2FFY »

QTH: Itä-Helsinki Elevated vertical and dipole both for 20 meters.
HAM: 100W , FT-840, FT-101ZD MK3 . Others - Codan, various QRP.
CB:Sidewinder III.(antiiki) AX-144.
kolehmainen2
Vakiokävijä
Viestit: 93
Liittynyt: 28.4.2010 9:59
Paikkakunta: Vihti, Selki

Re: CB's for sale.

Viesti Kirjoittaja kolehmainen2 »

hi, what is a special price for me ;) . Maybe you can answer "YV".
Duna
Avatar
OH2FFY
Viestit: 12
Liittynyt: 24.3.2010 19:21
Paikkakunta: Only Ham Op in Itäsalmi-Östersundom
Viesti:

Re: CB's for sale.

Viesti Kirjoittaja OH2FFY »

kolehmainen2 kirjoitti:hi, what is a special price for me ;) . Maybe you can answer "YV".

One MILLION .... dollars !! :lol:

Kuva

Have a look at the pictures of the rigs and if any of them interest you you can send me a message.
If you have any technical questions about them I can also answer them then.

gregW:-) OH2FFY
QTH: Itä-Helsinki Elevated vertical and dipole both for 20 meters.
HAM: 100W , FT-840, FT-101ZD MK3 . Others - Codan, various QRP.
CB:Sidewinder III.(antiiki) AX-144.
Avatar
OH6HGW
Addikti
Viestit: 2770
Liittynyt: 17.3.2005 15:31
Paikkakunta: Seinäjoki

Re: CB's for sale.

Viesti Kirjoittaja OH6HGW »

Mitä hintaa? In english osio on kieltä osaamattomien osio jossa ei ole mitään erillisiä sääntöjä. Täällä saa kirjoittaa englanniksi jos huvittaa. Myyntiosiolla on myynti-ilmoituksista säännöt, kirjoittamalla muulle osiolle voi asian kiertää...
Avatar
OH2FFY
Viestit: 12
Liittynyt: 24.3.2010 19:21
Paikkakunta: Only Ham Op in Itäsalmi-Östersundom
Viesti:

Re: CB's for sale.

Viesti Kirjoittaja OH2FFY »

susi 2 kirjoitti:how much one?? or all.
Much has already been sold.
Check the pictures to see what is still currently available.

http://hfdxer.x90x.net/temp/1.jpg
http://hfdxer.x90x.net/temp/2.jpg

Now I also have a Pearce Simpson Super-Puma

http://hfdxer.x90x.net/temp/3.jpg

It is also 40channel AM/LSB/USB 4W + 12W.
At the time , the Super Puma was a breakthough in construction practices as it was the first mini-SSB CB.

Perfromance though was not as good as Uniden (or clones).

I will check this radio on the workbench out before it leaves here , and if its working fine , it will probably sell for 20 -30E + P+P.


I also have a suspension microphone mont.,
I bought this new (it will fit most hand held condensor mic's) and I used it for about 2 weeks.
Then I bought a large studio condensor microphopne and this mount no longer fits it.
So it is for sale too.

It is like new and will sell for 20E.+ P+P.


Also I have a foot pedal.
I use these for switching rgis from RX to TX.
This one is NEW and I only pulled it out of the box to take this picture.
It is all metal construction , not cheap plastic , and it will last forever.
Inside they have a conventional microswitch and a spring.
In My own one that I use with my Yaesu FT-101ZD I softened the spring up to make it comfortable on the foot.
Most rigs will need the end plug to be changed over , or addapted.
This switch can work with NO and NC switching.

http://hfdxer.x90x.net/temp/4.jpg

This will sell for 10E .+ P+P.


gregW:-) OH2FFY
QTH: Itä-Helsinki Elevated vertical and dipole both for 20 meters.
HAM: 100W , FT-840, FT-101ZD MK3 . Others - Codan, various QRP.
CB:Sidewinder III.(antiiki) AX-144.
Vastaa Viestiin